MITSUBISHI MR-H200ACN Product information and technical parameters:
Brand: MITSUBISHI
Name: Servo amplifier
Model: MR-H200ACN
Drive: MR-H_ACN series built-in positioning function.
Rated output: 2.0KW.
In servo drive speed closed loop,
Rotor speed measurement accuracy is very important to improve the
dynamic and static characteristics of the speed control loop.
In order to seek the balance between measurement precision and
system cost, incremental photoelectric encoder is generally used as
the speed measuring sensor,
The corresponding method is M/T velocity measurement.
Although the M/T measurement method has a certain measurement
accuracy and a wide range of measurement,
But this method has its inherent defects,
Mainly includes: the measurement period must be detected at least
one complete encoder pulse, limiting the minimum detectable speed.
2 control system for speed control of the timer switch is difficult
to maintain synchronization,
Can not guarantee the accuracy of measurement in the situation
where the speed change is larger.
Therefore, it is difficult to improve the speed tracking and
control performance of servo drive by using the traditional speed
loop design method.
Type: HF-KN servo motor, low inertia, low power.
Rated output power: 0.75kw.
Rated speed: 3000r/min.
Electromagnetic brake: there.
Oil seal: have.
Encoder resolution: 131072p/r.
S100 representative: Super MR-E special motor.
KH003 special mark for Super MR-E.
High performance and easy to operate, reduce work load MITSUBISHI
MR-H200ACN.
Enhanced system cost performance.
High performance, high precision positioning (servo motor encoder
resolution: 131072) MR-H200ACN
High response.
Suppression of vibration by adaptive vibration suppression control.
Using personal computer and servo setup software to optimize
tuning.
Has 2 types of interfaces:
Position control and speed control with pulse train interface.
The analog input interface is used for speed control and torque
control MITSUBISHI MR-H200ACN.
Wide use.
Machining equipment and machine tool feed.
Used for food, packaging equipment and feeding device.
For textile machinery, etc..
Can improve the performance of equipment.
Servo amplifier terminals are used to reduce the required wiring
time.
The connector is located in front of the servo amplifier, which is
convenient for cable connection MITSUBISHI MR-H200ACN.
The gain adjustment can be easily carried out by the real-time
automatic tuning function. Type: general purpose AC servo amplifier
MR-E series.
Rated output: 0.1kw.
Interface type: analog input interface.
KH003 special mark for Super MR-E.
Servo amplifier terminals are used to reduce the required wiring
time.
The connector is located in front of the servo amplifier, which is
convenient for cable connection.
The gain adjustment can be easily carried out by the real-time
automatic tuning function.
Wide use.
Machining equipment and machine tool feed.
Used for food, packaging equipment and feeding device.
For textile machinery, etc..
Can improve the performancee of equipment MR-H200ACN. Motor series:
ultra low inertia, low power.
Rated output power: 0.75kw.
Rated speed: 3000r/min.
Whether to bring the brakes: with.
Shaft end: Standard (straight).
Protection level: IP55 does not include the shaft part and the
connector MR-H200ACN.
Features: ultra low inertia is suitable for high frequency
operation.
Application examples: the insertion device, the assembly machine.
